UTS ElectricPros - authorized Cummins generator dealer

Connect Series Air-Cooled

Cummins RS20A — 20kW Standby Generator

20kW air-cooled standby generator, Natural Gas / LP Vapor. The volume seller. Two-story suburban homes across Plano, Frisco, McKinney and Southlake.

On natural gas this unit produces 18kW, not 20kW. The headline rating is the propane figure. Almost every DFW home runs natural gas, so size against 18kW unless you are on a propane tank. Most sellers publish only the larger number.

Cummins RS20A 20kW air-cooled Natural Gas / LP Vapor standby generator

Representative manufacturer image of the range. Enclosure finish, color and dimensions vary by model and configuration — see the specifications below for this unit.

18 kW natural gas · 20 kW LP Natural Gas / LP Vapor Air-cooled Aluminum

The RS20A is an air-cooled unit in an aluminum enclosure, which is the right build for a residential yard: no radiator loop to service, a smaller pad, and a footprint of 34.1 x 36 x 27.3 inches at 531 lb.

It runs on natural gas or LP vapor. On natural gas there is no tank to fill and no runtime limit as long as the utility main holds pressure, which is why it is the default choice on almost every DFW home that already has gas service.

How do you want it?

Installed figures: Estimate only; installations vary, and a site visit determines your price.

Equipment price
$5,925.25

Monthly payments with Affirm or Klarna at checkout, subject to approval. How financing works

Equipment only — installation quoted separately

The RS20A is sold by UTS ElectricPros, an authorized Cummins dealer in Dallas–Fort Worth. Buying through an authorized dealer is what keeps the manufacturer warranty valid — equipment bought from an unauthorized reseller frequently is not covered, and owners tend to find that out at the worst possible moment.

This price is for the equipment. Installation is not included.

Ships free to Texas

Typically ships in 4-13 days

Estimated installed cost, typical 20kW DFW job
$16,000 - $18,500

Estimate only. Every installation is different; a site visit is required to determine whether your installation will cost less or more than this estimate. Includes equipment, standard installation by our licensed electricians, the pad, a transfer switch, the city permit and sales tax. The gas line is not included: most customers hire their own licensed plumber or gas company because it costs less, and we can arrange one and quote it separately. The builder itemizes yours.

See my installed price

Two minutes, no phone call needed. Pick the pad, switch and warranty and watch the total.

Get a written quote after a free survey

Or call (214) 957-4307

Want us to install it?

Installation is not included in the equipment price and is not sold at checkout. Your written quote comes after a free on-site survey and replaces any estimate. You are welcome to buy the equipment here and use your own electrician.

  • ✓ Concrete or composite pad
  • ✓ Gas line by your own plumber, or one we arrange and quote separately
  • ✓ Transfer switch and electrical tie-in
  • ✓ Permit and city inspection
  • ✓ Startup, load test and walkthrough

The gas line is run by a licensed plumber. Most customers hire their own plumber or propane company because it costs less, or we can arrange one and quote it separately. How the gas side works

Build my itemized installed estimate →


Prefer to talk it through? Have us call you.

We call back within one business hour, Mon–Fri 7am–6pm and Sat 8am–noon. We do not sell your details to anyone.

Specifications

ModelCummins RS20A
Rated output20 kW
FuelNatural Gas / LP Vapor
CoolingAir-cooled
EnclosureAluminum
Weight531 lb
Dimensions (L×W×H)34.1 x 36 x 27.3 in
Voltage configurations120/240 1Ph
Extreme cold package Available as an upgrade
Transfer switch Sold separately, sized to your service
Applicationresidential
Output — natural gas18 kW (75 A at 240 V)
Output — LP vapor20 kW (83.3 A at 240 V)
Sound level65 dB(A) 65 dB(A) at 23 ft (7 m) at normal load
Cummins modelC20N6H
EngineQSJ999G — Naturally aspirated, V-twin, air-cooled
Displacement60.96 in³ (999 cc)
Cylinder blockAluminum
Rated speed3600 rpm
Motor starting40 kVA at 30% voltage dip — starts a 5-ton A/C under full pre-load
Voltage regulation±1.25% no load to full load
Frequency regulationIsochronous, ±1.25% steady state (±1.5% at no load)
Harmonic distortionLess than 5% total harmonic distortion
Main breakerSingle 100 A circuit breaker, UL certified
Battery requiredGroup 51R, 450 CCA at 32°F (0°C) — part A052Y816, bought locally
Clearance to structure18 inches from a building (meets NFPA 37)
Gas supply pressureNG 3.5 – 12.0 in H₂O (0.87 – 3.0 kPa) · LP 6.0 – 12.0 in H₂O (1.49 – 3.0 kPa)
Fuel use at full load268 ft³/hr natural gas · 112 ft³/hr LP
Operating temperature-40°F to 122°F (-40°C to 50°C)
Wind ratingEvaluated to withstand 180 MPH wind loads per ASCE 7-10
DeratingFull rated power to 60°F (15°C) and sea level. Derate 3.5% per 1,000 ft and 1% per 10°F above that.
CertificationsUL 2200, CSA 22.2 and B149.1, EPA emissions, NFPA 37
Warranty5 year / 2,000 hour limited warranty. RA automatic transfer switches carry a separate 2 year warranty.
Extended warrantyCummins factory coverage for 5, 7 or 10 years, from $272.22. See every price

Available configurations

This model ships in a single factory configuration.

Part number Voltage Phase Price
A071Z397 120/240 1Ph $5,925.25

All prices are for the equipment only.

Built in

What the RS20A does that the spec table does not show

Intelligent Load Management

The generator can control up to 4 loads and continuously monitors how much power each one needs, then restores only the loads it has capacity to run. This is what makes a 20kW unit cover a house with two air conditioners.

Patented Crank-Only exercise mode

The weekly exercise cycle can crank the engine and run diagnostics without actually starting it, which reduces wear, fuel use and the noise of the exercise run.

Remote monitoring, built in

Remote monitoring is standard on every unit. From a computer, tablet or phone you can check status, change the exercise schedule and start the generator manually.

5-ton air conditioner start

Rated to start and run a 5-ton A/C under full pre-load — the load that decides generator sizing in Texas.

Accessories and maintenance parts for this unit →
Specifications on this page are taken from Cummins Power Generation spec sheet NAS-6254-EN (A056T581), RS13A / RS17A / RS20A / RS20AC, retrieved 2026-08-19. Download it from Cummins →

Pairs with

Transfer switches for a 20kW set

The switch is sized to your electrical service, not to the generator. These are the families that typically apply at this output — we confirm the exact one at the survey.

Questions about the RS20A

How much does a Cummins RS20A cost installed in Dallas-Fort Worth?

The RS20A equipment price is $5,925.25. Installed in DFW, a typical 20kW job is estimated at $16,000 to $18,500, covering equipment, standard installation by our licensed electricians, the pad, a transfer switch, the city permit and sales tax. The gas line is not included: most customers hire their own licensed plumber or gas company because it costs less, and we can arrange one and quote it separately. Estimate only. Every installation is different; a site visit is required to determine whether your installation will cost less or more than this estimate. The spread comes from the pad, cold weather and load shedding options, the transfer switch your service needs, and what your city requires for permits and inspection. Build an itemized estimate at /estimate, and we put the installation number in writing after a free site survey.

What will the RS20A actually run?

Whole-house coverage for a typical 2,500-3,500 sq ft DFW home with two AC systems, using load management. Final confirmation comes from a load calculation against your actual panel, which we do at the survey.

Do I need a transfer switch with the RS20A?

Yes. A standby generator cannot be code-compliantly connected without an automatic transfer switch - it is what keeps your generator from backfeeding the utility line and endangering line crews. The switch is sized to your electrical service, not to the generator, so we confirm your service size at the survey before specifying it.

Is the RS20A in stock?

Availability changes weekly. A refundable deposit reserves a specific unit and locks the equipment price for 90 days, which is the practical way to hold one while the survey and permit work happen. If we cannot source it in a reasonable window, you get the deposit back.

Same size, different build

Other 20kW configurations

Same 20kW output. What changes is the enclosure, the transfer switch and whether a cold-weather package is fitted — not the power.

Cummins RS20AE 20kW air-cooled Natural Gas / LP Vapor standby generator

Cummins RS20AE

Air-cooled · Natural Gas / LP Vapor

Cold weather −40°F
Equipment from
$6,300.85

Equipment only. Installation quoted after a free site survey.

View details
Cummins RS20AC 20kW air-cooled Natural Gas / LP Vapor standby generator

Cummins RS20AC

Air-cooled · Natural Gas / LP Vapor

ATS included
Equipment from
$6,868.48

Equipment only. Installation quoted after a free site survey.

View details
Cummins RS20ACE 20kW air-cooled Natural Gas / LP Vapor standby generator

Cummins RS20ACE

Air-cooled · Natural Gas / LP Vapor

ATS included Cold weather −40°F
Equipment from
$7,131.91

Equipment only. Installation quoted after a free site survey.

View details

Step up or down

Is 20kW the right size?

The next capacity either side in the air-cooled range. If you are not sure which way to go, the sizing calculator works it out against your own house rather than its square footage alone.

Down to 17kW — less headroom, lower install cost.

Cummins RS17A 17kW air-cooled Natural Gas / LP Vapor standby generator

Cummins RS17A

Air-cooled · Natural Gas / LP Vapor

Equipment from
$5,326.86

Equipment only. Installation quoted after a free site survey.

View details

Want the RS20A priced for your address?

Equipment is $5,925.25. The installation number depends on your property, and the only honest way to get it is to come look. That visit is free.

What it is for

Whole-house backup power, started automatically

The grid goes down and the house stops with it. In Texas that is not an inconvenience for long: in February it is heat and frozen pipes, in August it is air conditioning, and a house without either becomes uninhabitable within hours rather than days.

Why it becomes urgent

Winter storms and the spring severe-weather season take down distribution lines across the Metroplex every year, and summer peak demand on the ERCOT grid has repeatedly produced conservation appeals.

Who buys it

Homeowners who cannot simply leave — small children, someone on medical equipment, a well pump, a home office, or livestock on the property.

The RS20A is installed across the Dallas–Fort Worth Metroplex by our own licensed crews — the cities we serve, what installation involves, and a free on-site survey before any number is put in writing.

Before you buy the RS20A

The questions that decide whether this is the right machine, answered properly rather than in a sentence on a product page.

All the generator guides we have written

Every Cummins air-cooled standby, 13kW to 20kW · Or a portable, if you only need a few circuits

Installed across Dallas–Fort Worth

The RS20A ships anywhere in the country. Installation is Dallas–Fort Worth only, carried out by our own licensed crews under TECL #40628 operating from Grand Prairie — because a generator installation is quoted against your pad location, your panel and your city, which nobody can do from a warehouse. What installation actually involves.

All 27 cities we install in → · every install includes the permit, the inspection and meeting the inspector on site, and the number comes from a free on-site survey rather than a price list.

After the RS20A is in

A generator is a fifteen-year relationship, not a transaction. What that looks like from here.

Maintenance and service

Skipped maintenance is the top cause of an outage-night no-start. What a visit covers and how often it is due.

The battery, specifically

The component that fails most often when maintenance is skipped, and why the weekly exercise does not prove it is healthy.

Cummins warranty, and ours

What the manufacturer covers, what the installer covers, and which one you call when something fails.

Financing it

Monthly payments through Affirm, or fold it into a home loan at purchase or refinance.

Parts and accessories

Cold-weather kits, maintenance parts and the part numbers that fit this unit.

Call Now Installed price