Cummins RS17A
Air-cooled · Natural Gas / LP Vapor
Dallas County · Texas
Generator installation in Dallas
Cummins home standby generators sold at published equipment pricing and installed in Dallas by our own licensed electricians. We pull the permits, meet the inspector, and commission the unit under load before we leave.
Dallas generator installation at a glance
| County | Dallas County |
|---|---|
| Electric delivery | Oncor Electric Delivery |
| Natural gas | Atmos Energy |
| Installed by | Clements Electric, Grand Prairie |
| Permit required | Yes — we pull it |
| Typical 20kW installed | $13,500 – $17,000 |
| Site survey | Free, no obligation |
Why Dallas homes need standby power
Texas homes lose power for reasons that have nothing to do with how new the neighborhood is. Spring and early summer bring severe thunderstorms and straight-line winds that take down distribution lines. Winter brings ice loading, which is what put much of the state in the dark in February 2021 and again during Winter Storm Fern in January 2026. And summer brings peak demand on a grid that has repeatedly asked Texans to conserve.
What makes an outage genuinely serious here is air conditioning. A summer outage in Dallas is not an inconvenience, it is a habitability problem within hours, and it is the reason sizing a generator in Texas starts with your AC tonnage rather than your square footage.
Neighborhoods we work in around Dallas include Lakewood, Preston Hollow, Oak Cliff, Lake Highlands. Lot layout matters more than most homeowners expect: setback requirements from windows, doors and property lines determine where the generator can legally sit, and that distance drives both the gas run and the electrical run — the two biggest variables in your installation price.
Permits and inspection in Dallas
A standby generator in Dallas is a permitted installation. Depending on scope that can mean an electrical permit, a mechanical or gas permit, and one or two inspections. We pull the permits, schedule the inspection and meet the inspector on site. It is inside the installation quote, not a surprise line item afterward.
Requirements vary between Dallas County jurisdictions, and so do fees and inspection lead times. We confirm the specifics for your address at the survey rather than quoting a generic figure that may not apply to your street.
Utilities that affect your install
Electric delivery in Dallas is Oncor Electric Delivery. That governs how the transfer switch ties in at the meter and whether a service-entrance rated switch is the cleaner path. Natural gas is typically Atmos Energy, and the gas side is where installation prices move the most: if your meter has spare capacity and sits near the generator location, the gas work is straightforward. If the meter has to be upsized, that is a utility request with its own timeline.
Service territory boundaries in the Metroplex do not follow city limits cleanly, so we verify both utilities against your actual address rather than assuming from the city name.
Who actually shows up in Dallas
UTS ElectricPros is the authorized Cummins dealer. The installation is carried out by Clements Electric, our affiliated licensed electrical contractor operating from 2100 S Great Southwest Pkwy, Suite 505 in Grand Prairie.
That distinction is worth understanding, because most of this industry works the other way round. Online retailers ship a generator and leave you to find an installer. Lead-generation sites sell your details to whoever pays for them. Here the sale and the installation sit inside one relationship, which means nobody gets to point at the other when something needs sorting out in year three.
Popular in Dallas
Cummins RS20AC
Air-cooled · Natural Gas / LP Vapor
ATS included
Cummins RS13A
Air-cooled · Natural Gas / LP Vapor
Generator questions from Dallas homeowners
How much does a whole house generator cost in Dallas?
Equipment is published on every model page — a 20kW Cummins RS20A is $5,747.50. Installed in Dallas, a typical 20kW system runs $13,500 to $17,000 all in, including the pad, gas work, transfer switch, permit and commissioning. The spread depends on how far the generator sits from your gas meter and electrical panel, and whether the gas line needs upsizing.
Do I need a permit for a generator in Dallas?
Yes. Standby generator installations in Dallas require permitting and inspection, and depending on the scope that can mean separate electrical and mechanical permits. We pull the permits and meet the inspector — it is part of the installation quote, not an extra you discover later. Requirements and fees differ between Dallas County cities, which is why we confirm the specifics for your address rather than quoting a generic number.
Who provides gas and electric service in Dallas?
Electric delivery in Dallas is Oncor Electric Delivery, and natural gas is typically Atmos Energy. Both matter to a generator project: the electric utility governs how the transfer switch ties in at the meter, and the gas utility determines whether your meter can carry the additional demand or needs upsizing. We verify both against your actual address during the survey, because service boundaries in the Metroplex do not follow city limits cleanly.
How long does installation take in Dallas?
The physical work on a typical residential job is one to three days. The calendar time is usually driven by permitting and inspection scheduling rather than by our crew. We give you a realistic window at the survey once we know which jurisdiction and what scope — we would rather quote a date we can hit.
Do you actually serve Dallas, or just advertise there?
Yes. UTS ElectricPros is the authorized Cummins dealer, and the installation in Dallas is performed by Clements Electric, our affiliated licensed electrical contractor, operating from 2100 S Great Southwest Pkwy, Suite 505, Grand Prairie. That is one relationship, not a lead sold to whoever bids lowest — the same people who sold you the generator are accountable for how it goes in and how it runs afterward.