Cummins RS17A
Air-cooled · Natural Gas / LP Vapor
Dallas County · Texas
Cummins home standby generators sold at published equipment pricing and installed in Highland Park by our own licensed electricians. We pull the permits, meet the inspector, and commission the unit under load before we leave.
| County | Dallas County |
|---|---|
| Electric delivery | Oncor Electric Delivery |
| Natural gas | Atmos Energy |
| Installed by | Clements Electric, Grand Prairie |
| Permit required | Yes — we pull it |
| Typical 20kW installed | $13,500 – $17,000 |
| Site survey | Free, no obligation |
Texas homes lose power for reasons that have nothing to do with how new the neighborhood is. Spring and early summer bring severe thunderstorms and straight-line winds that take down distribution lines. Winter brings ice loading, which is what put much of the state in the dark in February 2021 and again during Winter Storm Fern in January 2026. And summer brings peak demand on a grid that has repeatedly asked Texans to conserve.
What makes an outage genuinely serious here is air conditioning. A summer outage in Highland Park is not an inconvenience, it is a habitability problem within hours, and it is the reason sizing a generator in Texas starts with your AC tonnage rather than your square footage.
That list is where the work actually is, not an exhaustive boundary — we install anywhere in Highland Park and across Dallas County. It is worth naming because lot layout matters more than most homeowners expect, though not for the reason people assume. What fixes the generator’s position is the manufacturer’s listed clearance from windows, doors and combustibles, plus the fuel gas and electrical codes. That distance then drives the gas run and the electrical run, which are the two biggest variables in your installation price.
Two things vary by subdivision rather than by city. Newer developments tend to have the gas meter and the panel on the same elevation, which shortens both runs; older ones frequently do not. And an HOA with an architectural committee adds a submission step — not a veto, because Texas Property Code § 202.019 bars an association from prohibiting a standby generator, but a step worth starting early.
A standby generator in Highland Park is a permitted installation, typically an electrical permit plus a gas permit where the fuel line is touched. Highland Park does not publish a generator-specific fee or checklist, so we confirm the current requirement with Dallas County at the survey rather than quoting a figure that may not apply to your street.
Either way we pull the permits, schedule the inspection and meet the inspector on site. It is inside the installation quote, not a surprise line item afterward — how installation actually works sets out the whole sequence, survey through commissioning, and what moves the price. If you have not settled on a size yet, the generator sizing calculator is the place to start, because the kW figure is what everything else in Highland Park is quoted against.
Worth knowing before you read Highland Park’s handout: Texas law now limits what a city may require on a residential generator install at or under 50kW, and some published city guidance predates it. Since 1 September 2025 a second statute lets a qualified third party do the plan review and the inspection instead of the city, which puts a three business day clock on the permit. See what your city can and cannot require, and what your HOA cannot prohibit.
Electric delivery in Highland Park is Oncor Electric Delivery, across the whole city, which makes this the straightforward case: one set of interconnection rules and one meter standard for every address we work at here. That decides how the transfer switch ties in at the meter and whether a service-entrance rated switch is the cleaner path.
Natural gas is typically Atmos Energy, and the gas side is where installation prices move the most: if your meter has spare capacity and sits near the generator location, the gas work is straightforward. If the meter has to be upsized, that is a utility request with its own timeline. Service territory boundaries in the Metroplex do not follow city limits cleanly, so we verify both utilities against your actual address rather than assuming from the city name.
UTS ElectricPros is the authorized Cummins dealer. The installation is carried out by Clements Electric, the dba our licensed electrical crews work under operating from 2100 S Great Southwest Pkwy, Suite 505 in Grand Prairie.
That distinction is worth understanding, because most of this industry works the other way round. Online retailers ship a generator and leave you to find an installer. Lead-generation sites sell your details to whoever pays for them. Here the sale and the installation sit inside one relationship, which means nobody gets to point at the other when something needs sorting out in year three.
Air-cooled · Natural Gas / LP Vapor
Air-cooled · Natural Gas / LP Vapor
Air-cooled · Natural Gas / LP Vapor
The whole range, here
Every Cummins line we carry is available in Highland Park. The ones below that are permanently installed, we install — with our own licensed electricians under TECL #40628, across Dallas County and the rest of the Metroplex. The rest ship direct to your address and need no electrician at all.
Equipment ships to all fifty states and completes in the cart. Installation is Dallas–Fort Worth only, because it is bounded by a Texas electrical license and quoted against your gas meter, your panel and Highland Park’s permit — how that works, or book the free survey.
Equipment is published on every model page — a 20kW Cummins RS20A is $5,747.50. Installed in Highland Park, a typical 20kW system runs $13,500 to $17,000 all in, including the pad, gas work, transfer switch, permit and commissioning. The spread depends on how far the generator sits from your gas meter and electrical panel, and whether the gas line needs upsizing.
Yes. Standby generator installations in Highland Park require permitting and inspection, and depending on the scope that can mean separate electrical and mechanical permits. We pull the permits and meet the inspector — it is part of the installation quote, not an extra you discover later. Requirements and fees differ between Dallas County cities, which is why we confirm the specifics for your address rather than quoting a generic number.
Electric delivery in Highland Park is Oncor Electric Delivery, and natural gas is typically Atmos Energy. Both matter to a generator project: the electric utility governs how the transfer switch ties in at the meter, and the gas utility determines whether your meter can carry the additional demand or needs upsizing. We verify both against your actual address during the survey, because service boundaries in the Metroplex do not follow city limits cleanly.
The physical work on a typical residential job is one to three days. The calendar time is usually driven by permitting and inspection scheduling rather than by our crew. We give you a realistic window at the survey once we know which jurisdiction and what scope — we would rather quote a date we can hit.
Yes. UTS ElectricPros is the authorized Cummins dealer, and the installation in Highland Park is performed by Clements Electric, the assumed name (dba) under which UTS ElectricPros, LLC operates its licensed electrical crews, working from 2100 S Great Southwest Pkwy, Suite 505, Grand Prairie. That is one relationship, not a lead sold to whoever bids lowest — the same people who sold you the generator are accountable for how it goes in and how it runs afterward.